AS-Interface gateway VBG-CCL-K20-D-BV
- Gateway compliant with AS-Interface specification 3.0
- Fault diagnosis via LEDs and grafic display
- Easy commissioning by graphic display
- AS-Interface monitor read via display
- Earth fault detection
- AS-Interface noise detection
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del VBG-CCL-K20-D-BV
| Descripción del producto |
|---|
| CC-Link gateway |
| General specifications | ||
|---|---|---|
| AS-Interface specification | V3.0 | |
| Earth fault detection | integrated | |
| EMC monitoring | integrated | |
| UL File Number | E223772 | |
| Indicators/operating means | ||
| Display | Illuminated graphical LC display for addressing and error messages | |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green | |
| LED CONFIG ERR | configuration error; LED red | |
| LED PRG ENABLE | Automatic addressing active; LED green | |
| LED POWER | voltage ON; LED green | |
| LED PRJ MODE | Configuration mode active; LED yellow | |
| LED U AS-i | AS-Interface voltage; LED green | |
| LED CC-Link | CC link in operation; LED green CC Link error; LED red |
|
| Button | 4 | |
| Switch SET | Selection and setting of a slave address | |
| OK button | Mode selection traditional-graphical/confirmation | |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor | |
| ESC button | Mode selection traditional-graphical/cancel | |
| Electrical specifications | ||
| Insulation voltage | ≥ 500 V | |
| Rated operating voltage | from AS-Interface 30 V DC | |
| Rated operating current | ≤ 200 mA from AS-Interface | |
| Interface 1 | ||
| Interface type | Remote device, 3 occupied stations | |
| Protocol | according to CC-Link specification | |
| Transfer rate | 156 Bit/s up to 10 MBit/s | |
| Connection | ||
| AS-Interface | spring terminals, removable | |
| CC Link | 5-pin screw terminal | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2006, EN 61000-6-4:2007 | |
| Standard conformity | ||
| Degree of protection | EN 60529:2000 | |
| AS-Interface | EN 62026-2:2013 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Material | ||
| Housing | Stainless steel | |
| Mass | 520 g | |
| Dimensions | ||
| Height | 120 mm | |
| Width | 85 mm | |
| Length | 83 mm | |
| Construction type | Low profile housing , Stainless steel | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242607 |
| ECLASS 12.0 | 27242607 |
| ECLASS 11.0 | 27242607 |
| ECLASS 10.0.1 | 27242607 |
| ECLASS 9.0 | 27242607 |
| ECLASS 8.0 | 27242607 |
| ECLASS 5.1 | 27242607 |
| ETIM 9.0 | EC001603 |
| ETIM 8.0 | EC001603 |
| ETIM 7.0 | EC001603 |
| ETIM 6.0 | EC001603 |
| ETIM 5.0 | EC001603 |
| UNSPSC 12.1 | 39121535 |
Details: VBG-CCL-K20-D-BV
Product Documentation: VBG-CCL-K20-D-BV
| Manuals | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Manual AS-Interface 3.0 Command Interface | ENG | 3265 KB | |
| Manual VBG-CCL-K20-D-BV | ENG | 4858 KB |
Design / Simulation: VBG-CCL-K20-D-BV
| CAD | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2631 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VBG-CCL-K20-D-BV
| Certificates | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| AS-International Association AS-Interface | 124601 | ALL | 100 KB | |
| US CA UL | E223772 | ALL | LINK | --- |
| Worldwide Certificate | Ref.No. 871 | ALL | 344 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2452C | ALL | 109 KB | |
Este documento técnico gratuito en formato PDF compara los diferentes protocolos de comunicación basados en TCP (AMQP, OPC UA, MQTT, REST API) que se han hecho un hueco en el sector y se consideran los habilitadores del IIoT y de la Industria 4.0. Descárguelo ahora de forma gratuita.
Conozca la gama completa de los productos AS-Interface.
Pepperl+Fuchs, S.A.
Txori-Erri Etorbidea, 46
Edificio Esser
48150 Sondika (Vizcaya)
España
sov@es.pepperl-fuchs.com
+34 94 4535 020
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.